Here's what our customers are saying about our Touch Up Paint:
Tom P, owner of a 1989 Chevrolet Silverado from Casper, WY
1st I am far from a professional painter.
The tailgate on my 35 year old truck was not in good shape, due to a poorly done repair pre 1992 by original owner.
I figured anything I could do would be better.
I used all spray can products from Automotive touch up, primer, matched paint, and clear coat.
Originally using the tools from my garage, I started with wood sander, quickly purchasing a low budget grinder to take it down to metal. I then built a low budget paint booth in my garage with plastic sheets.
The tail gate was primed followed by a light hand sanding. I then painted it with 7 layers of paint followed by 5 coats of clear coat. It was looking good.
Now don’t do this. After a day 1/2 of drying time on the last clear coat, I flipped it over on my saw horses with pad to protect the new paint job on the other side! Proceeded to sand prime and paint the other side with less effort because it the work side of the tail gate It looked good.
But when I went back to the front. The padding left marks in the clear coat.
I tried hand sanding only the area’s affected but failed. I purchased an orbital sander polisher. Went down to (6000 or 4000 don’t recall) grit and it was glass smooth before I redid the clear coat.
Hear I learned another lesson the prep all the way back to the stripping to metal matters if you are wanting a great paint job. I was never expecting to do a great paint job but when I polished down with such fine grit I could see the p
Keith S, owner of a 1988 Chevrolet Camaro from Norwich, CT
My wife scuffed the garage door while pulling her camaro in and took the paint off the driver side nose in and i was able to fix it like it never happened with your paint. It matched really well , people cant believe that i did it with a spry can . This is the second job i did like this on 2 different cars. Another job well done thank you.
Share your touch up story...