Choose your Automotive paint color for your 1990 Chevrolet Nexia

Restore Your 1990 Chevrolet Nexia Finish In Two Steps

Select Your Chevrolet's Color (Step One)

AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 1990 Chevrolet Nexia using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s color code, so you can find it on the chart below. The color code will be located on a sticker named Parts Identification. The code can start with BC/CC followed by a U, or a WA with a four digit number/letter combination. We use the WA format for simplicity, your code may have a U. WA8555 is the same as U8555. Click here for Chevy paint code location chart and paint code label examples.

Chip Color Codes Color Description
1990 Chevrolet Nexia Touch Up Paint | Summit White/Olympic White 50, 50-8624, 50U, 8624, GAZ, GAZ-8624, GCZ, WA8624 50, 50-8624, 50U, 8624, GAZ, GAZ-8624, GCZ, WA8624 Summit White/Olympic White

 

Why The Two-Step Paint System?

Your 1990 Chevrolet Nexia is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Tom P, owner of a 1989 Chevrolet Silverado from Casper, WY

1st I am far from a professional painter. The tailgate on my 35 year old truck was not in good shape, due to a poorly done repair pre 1992 by original owner. I figured anything I could do would be better. I used all spray can products from Automotive touch up, primer, matched paint, and clear coat. Originally using the tools from my garage, I started with wood sander, quickly purchasing a low budget grinder to take it down to metal. I then built a low budget paint booth in my garage with plastic sheets. The tail gate was primed followed by a light hand sanding. I then painted it with 7 layers of paint followed by 5 coats of clear coat. It was looking good. Now don’t do this. After a day 1/2 of drying time on the last clear coat, I flipped it over on my saw horses with pad to protect the new paint job on the other side! Proceeded to sand prime and paint the other side with less effort because it the work side of the tail gate It looked good. But when I went back to the front. The padding left marks in the clear coat. I tried hand sanding only the area’s affected but failed. I purchased an orbital sander polisher. Went down to (6000 or 4000 don’t recall) grit and it was glass smooth before I redid the clear coat. Hear I learned another lesson the prep all the way back to the stripping to metal matters if you are wanting a great paint job. I was never expecting to do a great paint job but when I polished down with such fine grit I could see the p

ILLINI FAN, owner of a 1991 Chevrolet Lumina Sedan from East Moline, IL

I have a 1991 Chevy Lumina Euro that I bought new. It has been a great car and I take great care of it mechanically and finish, but living in the Midwest, the winters take their toll on car bodies. I have to do annual body work to the car, when it’s time to paint, I use Automotive Touchup Aerosol primer, Chevy 70 ( Torch Red ) base coat, and clear coat. It is amazing the spray pattern and coverage you get from Automotive Touchup aerosol paint. The match is perfect to the eye after I buff the new paint in to the old with a fine cut glaze. I also like Automotive Touchup ordering, it is fast, easy and secure online. My wife drives the Lumina the majority of the time and says she gets many comments on the car. Thanks to Automotive Touchup and some glass body repair, no one knows that it isn’t all metal.

Share your touch up story...