Choose your Automotive paint color for your 1958 Fiat (All Models)

HOME > TOUCH UP PAINT > FIAT > 1958 > CHOOSE COLOR

Restore Your 1958 Fiat (All Models) Finish In Two Steps

Select Your Fiat's Color (Step One)

AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 1958 Fiat (All Models) using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s color code, so you can find it on the chart below. Click here for the Fiat paint code location chart.

Please note: The 'All Models' pages sometimes have a large amount of results to scroll through, if your vehicle's model is in the list of options on the prior screen we recommend trying that first.

Chip Color Codes Color Description
1958 Fiat (All Models) Touch Up Paint | Blue Notte 456 456 Blue Notte
1958 Fiat (All Models) Touch Up Paint | Light Gray 604 604 Light Gray

 

Don't see your color listed?


Call 1-504-818-2334
We probably have it.

Did you choose the wrong vehicle model?

Why The Two-Step Paint System?

Your 1958 Fiat (All Models) is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Steve H, owner of a 1979 Fiat from Knoxville, TN

Perfect match for fiat 136f rosso cherry.

Steve C, owner of a 2016 Fiat 500X from Oberlin, OH

Great paint match, unable to tell where it was used to touch up stone chips on the front of my Fiat. Thanks

Michael Sweeney, owner of a 2017 Fiat 124 Spider from Orange

Red can be very tricky but the color match was perfect. I did use the same color of primer that the factory used which is crucial since red doesn't cover well as a rule. In my case, it took one mist coat and four decently wet coats to get the match. The best tip is to LIGHTLY wet sand the color coat with 1500 grit wet/dry then shoot the clear on that. The clear will bring up the gloss and level very nicely. Almost a dead match for the factory paint.

Share your touch up story...