Choose your Automotive paint color for your 1996 Fiat Mille

HOME > TOUCH UP PAINT > FIAT > 1996 > CHOOSE COLOR

Restore Your 1996 Fiat Mille Finish In Two Steps

Select Your Fiat's Color (Step One)

AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 1996 Fiat Mille using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s color code, so you can find it on the chart below. Click here for the Fiat paint code location chart.

Chip Color Codes Color Description
1996 Fiat Mille Touch Up Paint | Rosso Alpino/Rojo Alpino/Vermelho Alpine 178, 178A 178, 178A Rosso Alpino/Rojo Alpino/Vermelho Alpine
1996 Fiat Mille Touch Up Paint | Bianco Banchisa 249, 249F 249, 249F Bianco Banchisa

 

Don't see your color listed?


Call 1-888-710-5192
We probably have it.

Did you choose the wrong vehicle model?


Did you choose the wrong model? How about the 1996 Fiat 500, 500L, 500X, Abarth, Adventure, Argo, Coupe, Cronos, Doblo, E-Ulysse, Egea, Fastback, Grand Siena, Jumpy, Marengo, Mobi, Multipla, Panda, Punto, or Qubo?  If you're still not sure, take a look at our All 1996 Fiat Models page.  Or, just go to our page dedicated to Fiat Touch Up Paint

Why The Two-Step Paint System?

Your 1996 Fiat Mille is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Eric F, owner of a 2017 Fiat 124 Spider from Oswego, NY

Color is an excellent match. Both spray and touchup easy to use and get great results.

Michael Sweeney, owner of a 2017 Fiat 124 Spider from Orange

Red can be very tricky but the color match was perfect. I did use the same color of primer that the factory used which is crucial since red doesn't cover well as a rule. In my case, it took one mist coat and four decently wet coats to get the match. The best tip is to LIGHTLY wet sand the color coat with 1500 grit wet/dry then shoot the clear on that. The clear will bring up the gloss and level very nicely. Almost a dead match for the factory paint.

Share your touch up story...