Here's what our customers are saying about our Touch Up Paint:
William L, owner of a 2012 Ford Taurus from Minden, LA
I have not yet done the job to ensure that it matches but have used your products before with positive results, at least on solid colors. This one is a metallic one so I am not sure how that is going to work . Given your excellent reputation, I have no doubt it will do fine. I will be glad to do a follow up review once I have conducted the work if you want to keep my comments open.
Thomas V, owner of a 2012 Ford Flex from WI
2012 Ford Flex Color Code RZ (Candy Apple Red w/White top)..........
Bumper blemishes and door dings were primary reasons for repairs.........................
Color match is good but requires some "technique" to get hue correct. If you paint a very wet color coat, the metallic (or mica) tends to lay flat and shift the color slightly darker. Spraying a dry coat brightens up the color to match the factory color with very good results.
Let the base coat dry thoroughly before adding the clear. Clear can be applied in several coats with adequate dry time in between. I used a hair dryer gun to hurry along the clear coat applications. This will warm the panel which helps dry time and is good on more humid days. Warm the panel slightly before applying and then after it has set up a bit. If you can, warm the panel from the back side.
I used a Turtle Wax polishing compound afterward to buff out over spray.
I also used the color base and clear coat to touch up tiny door edge chips and dings. These I filled a bit with a glazing compound first and then used the spray can's lid and a Q-tip to dab in the base coat and later the clear coat finish. This worked fine. We had no 'dents' to fill on our car, just usual parking lot wear and tear. Car now looks as good as new. Without a magnifying glass nobody will ever notice these simple repairs have been done.
Great product, excellent delivery and a very good price.
Share your touch up story...