Choose your Automotive paint color for your 2007 Gmc Gts

Restore Your 2007 Gmc Gts Finish In Two Steps

Select Your Gmc's Color (Step One)

AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2007 Gmc Gts using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s color code, so you can find it on the chart below.

Chip Color Codes Color Description
2007 Gmc Gts Touch Up Paint | Atomic Mica Metallic 609R 609R Atomic Mica Metallic

 

Don't see your color listed?


Call 1-888-710-5192
We probably have it.

Why The Two-Step Paint System?

Your 2007 Gmc Gts is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Stephen R, owner of a 2006 GMC Canyon from Pierce, NE

I have bought paint from you guy over the past few years. I have been happy with the color match each time. You hit the mark again with the 2oz. touch up for my GMC CANYON.

John K, owner of a 2006 GMC Canyon from Auburn, WA

Well folks, it took some time to prepare and paint the damaged driver's side rear fender, as weather and other things delayed my efforts. The damage was on the lower part of the fender, and it was very difficult to repair and prepare, as the bumper was in the way. Bottom-line....I sprayed straight down from the rear, and then came to the side and sprayed from the rear and I tried to "feather" the stream as it fanned out towards the undamaged part of the fender. The color was good (as I found a can of my previous order which had enough paint to do the current damage. Feathering was the tough part as I couldn't easily spray a solid stream and then move it out to feather. The sprayed surface looked a little "sparse" in spots, but I played with it a bit more, and after curing, I used some pretty hard car wax to blend it all together. So I have a damaged spot fixed, not even noticeable unless one really sought out problems, and the color blend looks good. (The previous cans that I ordered were used to paint the canopy for the truck. Am I please with the two applications, and the paint as well....... you bet I AM! Thanks for the matching paint, and I do have an extra can for any other needs for repair! (Hope there aren't any)!!

Share your touch up story...